Nikwax Rug Proof

IMPORTANT: Shake bottle before use. Conventional detergent can damage water-repellency. Always clean rug first with Nikwax® Rug Wash in a separate wash cycle. Do not dry before waterproofing.

Industrial Size Washing Machine:

1. Remove all detergent build-up from the detergent dispenser.
2. Place maximum of 1 clean rug in washing machine.
3. Add 500ml of Rug Proof.
4. Run a 30°C synthetic cycle on a slow spin, with an extra rinse if possible.

Air dry or tumble dry on a low setting if care label allows.

Use Nikwax Rug Proof by hand…

1. Add 500ml of Rug Proof in 10L of warm water.
2. Agitate to mix, add and immerse entire rug.
3. Add additional 15L of warm water to cover rug and agitate.
4. Leave to soak for 2 hours, agitating occasionally.
5. Rinse in cold water until water runs clear.

Air dry or tumble dry on a low setting if care label allows.

Sponge on Nikwax Rug Proof…

1. Spread clean rug on clean area and wet thoroughly.
2. For 1  rug, mix 500ml with 1.5L of warm water.
3. Use new sponge to apply solution to rug, working into fabric and seams.
4. Leave for 5 minutes.
5. Rinse in cold water until water runs clear.

Drying: Air dry or tumble dry on a low setting if care label allows.

Care Advice…